Apparel & Gear

- MES, Motion Efficiency System - ExoBeam, full carbon outsole with nylon-injected nylon studs. - Exo Wrap construction - Two BOA IP1 closures with mirror design, more natural for tighten (clockwise on the right shoe, but counter-clockwise on the left shoe)

The World’s Lightest for the World’s Fastest Developed in partnership with Remco Evenepoel, the S-Works Torch Remco isn’t just the lightest shoe in the peloton at 148.2g—it’s the new benchmark for performance in the high mountains. Every gram, every detail was dialed through Remco’s feedback, refined with our Body Geometry methodology to deliver more power, more efficiency, and 44% less forefoot pressure. Validated during his debut Tour, it’s a shoe shaped by Remco, forged in the heat of Grand Tour battle.

Whether you're stomping huge air at Whistler, pinning the fastest line at Les Gets or anything gnarly closer to home, the Full-10 Spherical represents the pinnacle in both protection and performance. The Descendant Building on the success of the Full-9, along with feedback from trusted athletes, and featuring new technologies we developed in-house, the Full-10 Spherical was engineered to be the new standard in DH fit, protection, and style. Created in the Bell+Giro testing Dome in Scotts Valley, CA, our proprietary Spherical Technology powered by Mips features a ball-and-socket design that helps redirect impact forces away from the brain, allowing the outer liner to rotate around the inner liner during a crash. In addition, the Spherical Technology channels inside the lightweight unidirectional carbon shell allow us to achieve superior ventilation like never before—what we are calling our Thermal Exchange Airflow System (T.E.A.S.). This system sucks in cool air like a vacuum and then expels hot air through the side and rear exhaust ports because as any rider knows, ventilation and sweat management go hand-in-hand. With the Full-10, the effort is evident—from Ionic+ antimicrobial* comfort padding and magnetic cheek pads to an integrated breakaway camera mount and titanium D-rings on the chin strap. This work has all been for you the rider, because when you are in the start gate, or at the lip of the jump that will launch you to glory, we want you to only be thinking about the ride ahead. [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] *Ionic+ antimicrobial padding uses silver for helmet odor control - SPHERICAL TECHNOLOGY Spherical Technology's Ball-and-Socket design, powered by Mips, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - THERMAL EXCHANGE AIRFLOW SYSTEM Our most extreme ventilation system that sucks in cool air like a vacuum and then expels hot air through the side and rear exhaust ports. - IONIC+ PADDING Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. - INTEGRATED BREAKAWAY CAMERA MOUNT A seamless camera mount, requiring no zip ties or tape, is engineered to break away upon impact to help reduce the risk of injury. - PROGRESSIVE LAYERING The process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts. - FLYING BRIDGE VISOR TECHNOLOGY This visor design allows more flexibility and improves airflow across the helmet. By not using a traditional center post and screw concept, we're able to increase the amount of energy management material in a high-impact zone. - MAGNEFUSION MAGNETIC CHEEK PADS Magnefusion Cheek Pad Emergency Release System. - PANORAMIC GOGGLE PORT TECHNOLOGY A wider port provides better fitment, optimal sealing, and a massive field of view, increasing the rider's visibility and safety when needed most.

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The mtb helmet trusted by world cup champions Designed for the toughest downhill mountain bike runs, the Rampage Pro Carbon Intrude Helmet is full-face, full-gas, and packed with race-ready features and technology that’ll keep your head in the game and your safety on speed dial. When every second counts, you can’t argue with gravity. Lightweight performance and protection for all your downhill runs—you can’t argue with that either. - Full-face mountain bike helmet - Mips® added protection system is meant to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain - Breakaway visor screws are designed to shear off at impact to reduce rotational forces - Dual-density, In-Mold Varizorb™ EPS balances weight with performance and is meant to provide improved protection by spreading forces over a wider surface area - Lightweight carbon fiber shell construction - Injected Mesh vent screens maintain superior ventilation and airflow while shielding the rider from dirt and debris - Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture - Meets EN 1078, CPSC 1203, AS/NZS 2063, and ASTM F1952

When you challenge the natural elements, the only way to succeed is to become part of them. The Bambino Pro is a helmet that overcomes aerodynamic resistance through its unmistakable, innovative design to enhance your performance in time trials, triathlons and track races. The Bambino Pro features a removable magnetic visor. 3D dry - The tri-dimensional 3D DRY padding utilizes a multi-layer open cell construction process: high technology for the best comfort and performance. Aero Control - Incredibly aerodynamic and top performing shell, tested in the wind-tunnel and able to provide a really impressive CX rate. - Any position the head will assume the outflow of the air will be perfectly in line with the helmet. Coolmax - Removable and washable inner padding in Coolmax® material ECO Chinstrap - Chin pad with eco-leather chinstrap - The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin M in-molding - The innovative “in-molding” technology, joining the inner polystyrene cap to the outer polycarbonate one, ensures a better shock absorption. Magnetic Visor - The innovative magnetic visor is patented by KASK and integrated to the helmet thanks to a five magnets’ system. - The total adherence of the visor to the helmet allows a continuous air flow and a great aerodynamic.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high-performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the S-PHYRE RC903 Women’s is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 Women’s is a breathable, high-performance SPD-SL road racing shoe - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Women’s Sizing: designed with a women’s specific last for a natural, comfortable fit. - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The S-PHYRE RC903 Women’s takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

Low-volume winter bib tights that merge targeted protection, maximum breathability, and an aerodynamic fit for riders going full gas in the coldest conditions. For cyclists who prefer winter training outdoors, these are less a pair of tights and more a well-engineered toolkit of solutions for the problems associated with cold-weather cycling. They keep you off the trainer and connected to the road with a suite of technologies combining our S9 racing platform with the next evolution of our Winter 3/3 seasonal innovations. The result is the best fitting and most supportively compressive weatherproof bib tights we've ever pulled on. Light precipitation, knifing wind so frigid you can see it, and chamois-stinging road spray—any of them can prematurely end a winter ride, but these tights are engineered to stop them all. Though OSMOS Heavy, a stretchy insulator, constitutes the tights' body, the key textiles are our membrane-equipped SPHERE Ultra and SPHERE Medium. The weatherproof SPHERE panels are situated on the knees, thighs, hips, crotch, and lower back. Taped seams and DWR treatment are further proof against watery ingress. Our aeroFit is the most aggressive, most aerodynamic, most compressive, and—simply—the fastest option in our racing line.

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

At just 185g per shoe with pro-level performance and unrivaled comfort, the Empire SLX lets you fly in first-class style. To make a minimalist shoe that retains the supportive structure of the legendary Empire while advancing the style, we started with a one-piece ultralight monofilament Synchwire mesh upper designed around a classic laced closure to fit and feel like a second skin. Thermal-welded Teijin TPU adds structural support exactly where its needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness to weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber upper - Empire laces: hold a knot, durable, and light - Easton EC90 SLX2 high-modulus carbon - Titanium hardware - Replaceable heel pads - Ultralight Super Natural fit kit with adjustable arch support - Ultralight footbed - XT2 anti-microbial fiber top sheet - 185 grams (size 42.5 with ultralight footbed)

From the Enduro World Series to Red Bull Rampage, top riders demand the Giro Insurgent Spherical and the confidence it delivers. Our engineers maximized the intake points for cool, fresh air, resulting in cooling power 50% more efficient than the Disciple MIPS. A lightweight, soft-touch, and absorbent pad set includes two different cheek pads with each of the three sizes, allowing for a customizable fit, which are secured via a directional snap system allowing for easy removal in case of a crash. At 1,040 grams in size M/L, the Insurgent is 200 grams lighter than the Disciple MIPS despite additional features including the advanced protection performance of Spherical Technology. Insurgent Spherical utilizes a pair of different density EPP and EPS foam layers that work like a ball and socket to redirect impact energy in a crash. Additional features include a patent-pending Flex Gasket along the lower edge of the helmet, designed to reduce the role a helmet can play in certain collarbone impacts, tool-free breakaway visor bolts with integrated Allen key receiver for easy removal, and a central visor bolt hole, which does double-duty as the ideal mount for P.O.V. action cameras. - SPHERICAL TECHNOLOGY, POWERED BY MIPS — Spherical Technology's ball-and-socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. It also eliminates contact with hard plastic or slip-planes against the skin. - OPTIMIZED FRONT INTAKE VENTS — Giro engineers designed precise placement and shape of intake vents to optimize cool air flowing over riders' heads. - MAXIMIZED REAR EXHAUST VENTS — Our complex Wind Tunnel venting system allows hot air an easy escape route from the rear of the helmet. - BREAKAWAY VISOR BOLTS — Tool-free breakaway visor bolts are engineered with an integrated Allen key receiver for easy removal and replacement in case of crash. - DIRECTIONAL SNAP SYSTEM — In case of emergency, cheek pads are easily removable without disturbing the rider's head and neck position. - PATENT-PENDING FLEX GASKET — The zone along the lower edge of the helmet is designed to allow some flex, reducing the role a helmet can play in certain collarbone impacts. - STEALTH CAMERA MOUNT — The central visor bolt hole does double duty as an ideal location for mounting P.O.V. action cameras.

The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

Lightweight, downhill-certified, full-face helmet The Proframe RS Sol Helmet takes the lightweight breathability of the Proframe and elevates it to the next level of safety and performance. Featuring the all-new Mips® Integra Split protection system, which combines a dual-density foam for high and low-speed impacts, and a Low Friction Layer between the two layers designed to reduce rotational forces in a crash that would otherwise be transmitted to the brain. The BOA® Fit System allows for a precise and adjustable fit in the pro-level, downhill-certified helmet. - BOA® Fit System for class-leading fit and security - Mips® Integra Split impact protection system combines an EPP liner with the EPS layer and is designed to reduce rotational forces in a crash - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Ionic+® antimicrobial liner and cheek pads to optimize fit - FIDLOCK magnetic closure

The Proframe RS Taunt Helmet takes the lightweight breathability of the Proframe and takes it to the next level of safety and performance. Featuring the all-new Mips® Integra Split protection system, which combines a dual density foam - for high and low speed impacts - and a low friction layer between the two layers designed to reduce rotational forces in a crash that would otherwise be transmitted to the brain. Designed to meet the needs of all-mountain riders and enduro racers, the increased ventilation and decreased surface contact of the helmet keep you cool on long rides, while the Ionic+ and anti-microbial liner and multi-sized cheek pads provide optimized comfort and fit. The updated BOA® Fit System offers micro-adjustability providing class-leading fit and security. The chinstrap utilizes a FIDLOCK® magnetic closure system for easy-open and close, even with gloves. The 3-position adjustable visor with lock down screw is compatible with goggles. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount on the Fox Proframe RS mountain bike helmet.

More breathable, more compressive, more aerodynamic – the EQUIPE RSR S11 replaces the RSR SUPERLÉGER S9 as the most advanced Racing Series short in ASSOS history. The new textile wrapping the large muscle groups of the legs is our most compressive Kompressor textile to date, providing firm support to reduce the accumulated fatigue from micro-vibrations during hours of high-intensity riding. The seat and core are wrapped in the less compressive Type.911, which is the main textile of the RS S11 and R S11 bib shorts, employed here to relieve pressure on sensitive areas. The combination of compressive, ultra-elastic textiles allowed us to remove the rollBar while maintaining 360-degree stability, and the raw-cut waist eliminates restriction.The new RSR S11 insert incorporates the same low-volume, microshock-absorbing comfort and hyper cooling airflow of the RS S11 insert, but it includes additional shock-absorbing modules beneath the ischial bones, oriented for maximum effect in aggressive riding positions.

The Cytal Carbon helmet represents an ongoing pursuit to enhance performance and safety in road cycling. This innovative helmet incorporates advanced methods and technologies aimed at maximizing speed and protection. By utilizing production techniques typically found in luxury sports cars, POC has integrated a carbon wing into the helmet. This feature improves aerodynamics, reduces weight, and ensures that impact forces are distributed more evenly across the helmet's surface. The design process has also benefited from new modeling and simulation techniques, enabling extensive testing of various designs. This approach has redefined what is possible in a helmet, successfully balancing speed, safety, and performance to provide a fresh perspective on rider protection. Additionally, the helmet's front is designed for increased openness, allowing improved airflow for enhanced ventilation and reduced drag. It also features an adjustment system that spans from the temples to the back of the head, facilitating a secure and comfortable fit.

Perfectly fitting with maximum ventilation, class-leading comfort, and unmatched power transfer, the Infinito R1 Knit road cycling shoe delivers ultimate race performance. Infinito R1 Knit is the first knitted pro cycling shoe ever. Along with its unique knitted material, the all-new Infinito Closure System, superior stiffness, weight-saving materials and the intelligent implementation of new technology make it the pinnacle of performance road shoe design. The knit material is highly breathable, for superior temperature management and enhanced comfort. It is extremely light yet strong and supportive and looks amazing and dynamic. With Dynamic Arch Support technology’s structure and the Increased Volume Control system, which shapes the whole shoe’s upper directly around the foot’s profile, Infinito R1 Knit fits any rider precisely, easily and comfortably. The Infinito Closure System uses two micro-adjustable double Boa IP1-B dials with steel-coated nylon laces in an infinite configuration that adjusts the upper on the forefoot. The textile guides eliminate pressure points, providing optimum adaptable comfortable fit for high-power, high-intensity riding. It harmonizes with the new mesh footbed insole for the best possible ventilation and enhanced comfort. Its laterally stiff, light, Uni Direction Full Carbon Outsole is ventilated for maximum temperature control, and designed for ultimate power transfer from any riding style. Infinito R1 Knit is fi’zi:k’s range-topping shoe, and benefits from the latest technologies, materials and improved design based on feedback and input from some of the world’s leading pro riders. - Materials: Unique new Knitted Material - Outsole: Full UD Carbon Vented - Closure system: Double Infinito IP1-B - Insole: Infinito footbed - Weight: 255g (size 42.5)

The Hard Charger Built for the hard charger, the Super DH is most at home on steep terrain-featuring Spherical Technology and full DH certification. Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. The Super DH is loaded with additional features-including a 360-degree wraparound, tool-free removable chin bar beefy enough to satisfy the rigors of ASTM 1952 testing, a huge eyeglass- and goggle-friendly eye port, an adjustable-height visor, snap-in camera mount, Overbrow Ventilation and X-Static padding, and a quality fit that is second to none. The end result is uncompromising protection and performance, and unparalleled versatility. The Super DH is ready to take World Cup DH runs on the chin, bang out bike park laps until the chairlifts stop running, or settle into hours of back-country uphill grinding in search of that perfect ribbon of high-consequence singletrack. - SPHERICAL TECHNOLOGY—Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - MIPS—MIPS (Multi-directional Impact Protection System) is a leading slip-plane technology inside the helmet designed to help reduce rotational forces that can result from certain impacts. - REMOVABLE CHIN BAR—Removable protective chin bar designed for trail riding adaptability. Attaches with a simple 3-step connection process—no tools required. [Warning: All chin bars have limits, and serious injury or death can occur. Read owner's manual carefully before using your helmet.] - INTEGRATED BREAKAWAY CAMERA MOUNT—Seamless camera mount, requiring no zip ties or tape, is engineered to break away from the helmet upon impact to help reduce the risk of injury. - FLOAT FIT DH—A minimalist yet robust and lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments. - ADJUSTABLE VISOR—Adjustable visor allows for sun protection and easy goggle storage. - OVERBROW VENTILATION—Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation. - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and eyewear. - FIDLOCK BUCKLE—Fidlock is an easy-to-use magnetic buckle. This time-saving feature slides closed laterally for an effortless, secure fit.

Standout Style with Bold Visibility Choose to ride, choose to be seen. The new Ethos™ Mips® Shield is a revolution in transportation, with a clear, molded eye shield that stylishly adds protection from the elements while still allowing riders to use their existing eyewear. (The Ethos Mips Shield also is available without eye shield as the Ethos Mips.) Its compact and stylish form features the added protection of Mips® Brain Protection System highlighted by integrated LED front white lights, rear red lights, and amber turn signals, all controlled via an intuitive handlebar remote. The entire system is USB-C rechargeable with an estimated run time of 10 hours in low-blink mode and 5 hours in the high-blink mode, which delivers 45 lumens front and 30 lumens rear. Helmet and remote can be fully charged in just 2 hours and 1 hour, respectively. Despite the added technology, in-mold construction keeps the weight manageable, full hardbody coverage adds durability, and a Roc Loc® Mips City fit system plus quick-dry padding ensure comfort. Whether you're a dedicated bike commuter, running the kids to school on your e-cargo bike, or simply looking for added visibility as you ride around town, the Ethos Mips Shield is a look into the future. - REFLECTIVE WEBBING — Reflective threads are strategically woven into the helmet retaining straps for an added element of visibility. - INTUITIVE REMOTE — The handlebar-mounted remote controls the front and rear lights, allowing riders to select solid or flashing modes, change brightness levels, and easily activate the turn signals. - TURN SIGNALS — With their bright amber flashes, the integrated turn signals speak the common language of traffic, broadcasting the rider's intended path to other road users. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces, while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC CITY MIPS FIT SYSTEM — The Roc Loc City Mips fit system features a rubberized dial for easy adjustability and large plush pads for ultimate comfort and stability. The fit system is made of a durable flexible material for long term performance and daily lockability. The three positions of vertical adjustability, and 6cm range make this a perfect fit, for your daily use. - INTEGRATED AND RECHARGEABLE LED LIGHTS — Front and rear integrated and rechargeable LED lights: two front "be seen" white lights and two red rear lights for substantially increased visibility to drivers. HIGHLIGHTS - Built-in front (white) and rear (red) LEDs - Handlebar-activated turn signals (amber/yellow) - Micro-USB C rechargeable - Deep coverage - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Pro-inspired full-face mountain bike helmet featuring MIPS. - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Lightweight fiberglass shell construction designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture wicking liner - Lightweight and reliable Double D-Ring closure - Fiberglass, EPS, EVA, PC, PCV, Polyester

Pro-inspired full-face mountain bike helmet featuring MIPS. - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Lightweight fiberglass shell construction designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture wicking liner - Lightweight and reliable Double D-Ring closure - Fiberglass, EPS, EVA, PC, PCV, Polyester