Parts & Accessories

Sprocket adapter hat washer that adapts standard 23.8mm / 24mm / 15/16" sprockets to 19mm or 22mm spindles.

Assorted width bottom bracket spindle spacers for fine-tuning crank arm offset. Product Specifications - Compatibility: 19mm or 22mm Spindles - Includes: 2 x 0.6mm, 2 x 1.5mm, 2 x 3mm - Weight: 0.6 oz

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

- Service parts for E-13 chainguides

- Lower slider replacement parts for E-13 chainguides

- Replacement bolt for DUB cranks

Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.

- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation

Crank left arm, Blaze Powerspline, 175mm, pitch black

- Crank Arm Length: 170mm - Interface: Power Spline - Position: Left

Shimano, FC-TX801, Crank Arm, 170mm, Square, Black

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

- 3/8" thick Lexan for lightweight protection - Includes (4) 15mm male chainring bolts

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

- Protect your expensive narrow wide chainring from impacts - Lightweight thermoplastic bonded to a lightweight alloy backplate - 32t model fits 26-32t round rings and 26-30t oval rings - 38t model fits 34-38t round rings and 32-36t oval rings - Compatible with 1X and 2X drivetrains - CNC'd in Canada from 6061 aluminum with laser-etched graphics

- Shimano, FC-MT500 Crank Arm, Crank Arm, 170mm, Hollowtech II, Black, Y1VB98030

- Thermoplastic Beavertail protects chainring from impacts - For 1X and 2X drivetrains

SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.

Replacement crank arm for X5 GXP

Replacement crank arm for GX Eagle GXP

The Kink Eastman full guard sprocket was designed to take a beating, and its built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths, which gives the Eastman sprocket maximum compatibility. Its technical design creates a clean and symmetric aesthetic and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further. - Material: Fully CNC Machined 6061-T6 Aluminum - Thickness: 12.5mm Overall (8mm at Spindle) - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 5.3oz (25T)

For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs