Parts & Accessories

Giro MTB Shoe Replacement Cleat Hardware

Super-compact toe covers - will fit easily into a jersey pocket / Stretch waterproof PU fabric / Reflective print on front / Elasticated cuff / Cleat compatible sole Key Benefits: - Super-compact toe covers - will fit easily into a jersey pocket - Stretch waterproof PU fabric - Reflective print on front - Elasticated cuff - Cleat compatible sole

The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim

Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear

Key Benefits: -High stretch, waterproof, multi fabric construction -Wipe clean PU front panels with soft superstretch neoprene ankle -Zipless, pull-on design for comfort and shoe hugging fit -Highly durable, indestructible sole fabric overlays -Raw edge cuff with silicone gripper -Reflective trim

Water Frozen In Your Bottles? No Problem. Keep Riding Year Round With The Ultimate Cold Weather Overshoe That Keeps Your Feet Dry And Cozy In Even The Worst Of Weather. The Freezing Point Overshoe II is the next generation ultimate cold-weather riding overshoe. Rigorously tested in the depths of Scottish winter to give you the confidence to get out on your bike without having to worry about losing all feeling in your toes. Comfort was a key consideration when updating the Freezing Point Overshoe II. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, while a thick brushed internal face fabric provides warmth and comfort. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Fleece-lined neoprene construction - High-cut design for extra protection - Raw-edge neoprene with an inner silicone strip around the ankle to prevent movement and help keep water out - Offset rear zip with snap-down puller and zip guard - Hard-wearing aramid sole and stitching using aramid thread - Crank-rub protection print - Reflective details

Key Benefits: -Full length Velcro® closure at rear -Reflective logo and panels at rear -Elasticated stirrups -Durable 3 layer nylon sole -Suitable for a variety of footwear and cleats

Key Benefits: - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Moulded rubber toe cap with treaded underside to help climb steep, muddy slopes - Asymmetric front seam for improved fit - Hard wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee Design Philosophy Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. Improved Durability The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulate layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. 90-Day Satisfaction Guarantee So confident are we in this product that, if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase.

The utilization of GORE WINDSTOPPER material on these overshoes provides a low bulk solution to keep your feet warm. The flexible and breathable WINDSTOPPER material will fit snuggly to your shoes to prevent flapping and maximize moisture management. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Thermo lining: Increases warmth; brushed and soft back for next-to-skin comfort - Reflective logo and piping - Fully taped seams for increased protection - Zipper closure

Replacement BOA lace kit for the Course 2LS, LS-100 and T-Flex LS-100

DIVERT THE ELEMENTS. The new all-weather Diversion kit, featuring a simple, elegant cycling-specific design, helps you avoid the harsh elements thanks to ProTextura fabric technology with water-repellent protection that keeps you warm and dry when everything else around you is cold and wet. - Water-repellent outside layer backed with a windproof, soft lining featuring moisture transfer properties to keep your feet warm - ProTextura 4-way stretch fabric features waterproof and windproof (0 cfm) protection with high breathability - Elegant, functional reflective elements for visibility - Designed to fit most common clipless pedals - Silicone gel gripper - Back zipper enclosure - 3D ergonomic fit - UPF 50+

Giro's Ambient Toe Covers add just the right amount of extra warmth on cool rides. Wind- and water-resistant neoprene covers are lined with AGrid fleece for warmth and protection from the elements. Reinforced toe guards add durability and reflective accents enhance visibility. - S/M (36-42) | L/XL (43-48)

Every second, every watt, every advantage counts during a time trial. Giro's Ultralight Aero Shoe Covers are made from thin, light, form-fitting Lycra to improve your aerodynamics for the winning edge. Reflective, locking zippers in the back make for easy on/off.

Giro's Knit Shoe Covers add just a touch of extra warmth, protect your shoes from winter road grime, and light up the night with visibility-enhancing reflective ankle stripes. Cordura knit fabric is tough as nails and will stand up to enthusiastic use. Details: When it comes to your cycling shoes, a little protection can go a long way. The Knit Shoe Cover is a reliable, lightweight option that you're sure to appreciate when temps drop. In addition to protecting your cycling shoes from road grime, the Knit Shoe Cover adds a touch of warmth for transition weather and help keep you lit up at night with reflective ankle cuff thread.

These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.

The X-Static Supernatural Insoles Fit Kit delivers customizable arch support for a better feel. Two cycling-specific footbeds and three interchangeable sets of arch inserts, ranging from small to large sizes, fit together without the need for tools.

The waterproof, seamless Xnetic H2O Shoe Covers have enough warmth and durability for you to stay comfortable when the temperatures freeze but the need to ride burns. Waterproof, breathable protection without excess bulk or stiffness. The Xnetic H2O shoe cover brings waterproof performance, seamless construction, and breathable fibers together for the highest level of flexibility available. The unique three-layer composition fuses our RainGuard membrane between a durable nylon outer shell and hypoallergenic liner, for use in wet weather and temperatures that dip towards freezing.

Stay insulated and protected on the trail The water- and wind-resistant neoprene exterior of the Proof™ MTB Winter Shoe Covers are optimized with flex zones in key areas and engineered from a super-stretch neoprene that minimizes bulky feel without compromising warmth. The sole includes a molded rubber bottom to help improve traction and durability when worn over mountain bike shoes. Reflective detailing and locking zipper are the finishing details in this essential winter off-road shoe cover. Compatible with most mountain bike shoes. Sizing: · S 37 - 39 · M 39 - 42 · L 42 - 46 · XL 46 - 50 Details: · Water-resistant neoprene fabric · Super-stretch neoprene flex zones at ankle · YKK™ locking zipper · Reflective highlights · Durable walking pads · 20 to 45F / -6 to 7C

The REFLECT360 overshoes offers exceptional waterproofing and all over reflectivity for commuters and night riders. Utilizing our REFLECT360 technology, the material reflects vehicle headlights so they light up to be bright white to help your position on the road be more easily identifiable. They have a waterproof lock-zipper, reinforced toe and heel, calf hook and loop adjustment and an open sole for your cleats. All in all, everything you'd want in a top quality waterproof shoe cover. - 100% REFLECT360 reflective material - Protective mesh covering the reflective paneling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, calf hook & loop adjustor and open sole - Reinforced toe and heel - Designed to be worn with cycling shoes - not trainers or other shoes

- 100% reflective outer-facing panelling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, heel loop, calf hook & loop adjustor and open sole - Reinforced toe and heel to be worn with cycling shoes

- 100% reflective outer-facing panelling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, heel loop, calf hook & loop adjustor and open sole - Reinforced toe and heel to be worn with cycling shoes

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

L6 Boa assembly for all Specialized L6-equipped shoes.

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools

Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.