Parts & Accessories

This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Floor pump nylon braided hose with ABS flip thread chuck and connectors, compatible with all standard pressure floor pumps.

Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.

Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.

The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum

New design in full metal to quickly identify Presta and Schrader sides. Longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the TwinHead DX pump head includes extra long and mounting hardware. - Head: Full metal TwinHead DX1 Fits Presta / Schrader / Dunlop - Material: Aluminum head / Rubber hose - Pressure Tuning: Air release button - Size: 8.2 x 5 x 4.3 cm / 3.2” x 2” x 1.7” (head); 110 cm (hose length) - Weight: 100 grams

Rebuild kit for the HP floor pump. - Compatible with Air Tool HP floor pump. - Includes O-ring, lube, and grommet.

- Head/Hose for Air Tool UHP pump

Rebuild kit for the MTB floor pump. - Compatible with Air Tool MTB floor pump. - Includes O-ring, lube, and grommet.

Rebuild kit for our most common Air Tool floor pumps. - Compatible with Air Tool Pro, Comp, and Sport floor pumps. - Includes O-ring lube and grommet.

Direct replacement head and hose for Comp MTB and HP floor pumps. Also works with Sport floor pump. - Replacement head and hose for most Air Tool floor pumps. - Compatible with Air Tool MTB, Comp, HP, and Sport floor pumps.

Replacement UHP head O-ring seal

160 PSI replacement analog pressure gauge for all standard travel floor pumps; includes glue and O-ring. With a 1.5-inch face, this gauge increases visibility and allows a precise measurement of tire pressure.

220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.

- 350 PSI replacement pressure gauge - For all floor pumps - Includes glue and o-ring - Highly precise with a 3.5-inch screen - Two-button system for easy use

Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.

For all of the following models: - Carbon Drive - Alloy Drive - Tech Drive HV - HV Drive - Sport Drive HV - Micro Floor Drive HV - Micro Floor Drive HVG - Swivel Drive HV

This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.

Replacement or upgrade for the Micro Floor Drive Pump. ABS chuck and inline pen gauge. Compatible with all Micro Floor Drive Pumps.

Lezyne Pump Parts

- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps - Sold as a pair

Replacement CNC-machined aluminum pump mount for all Road Drive and Carbon Road Drive pumps. Includes Velcro pump strap.

A rebuild seal kit for the following Lezyne hand pumps: - Road Drive - Carbon Road Drive