Cycling Shoes

- MES, Motion Efficiency System - ExoBeam, full carbon outsole with nylon-injected nylon studs. - Exo Wrap construction - Two BOA IP1 closures with mirror design, more natural for tighten (clockwise on the right shoe, but counter-clockwise on the left shoe)

The World’s Lightest for the World’s Fastest Developed in partnership with Remco Evenepoel, the S-Works Torch Remco isn’t just the lightest shoe in the peloton at 148.2g—it’s the new benchmark for performance in the high mountains. Every gram, every detail was dialed through Remco’s feedback, refined with our Body Geometry methodology to deliver more power, more efficiency, and 44% less forefoot pressure. Validated during his debut Tour, it’s a shoe shaped by Remco, forged in the heat of Grand Tour battle.

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The Imperial II delivers every feature the fastest racers demand. Secure, micro-adjustability on the fly comes from a BOA Fit System featuring Dual Li2 Dials. An all-new flat knitted Synchwire upper serves up the highest levels of comfort and breathability, courtesy of an unique knitted mesh construction which integrates venting and adds durability via a thermally bonded TPU skin. A completely new forged carbon fiber outsole plate improves the stiffness by 20Nm while keeping the total weight of the shoe to a mere 235gm for size 43. With Giro's signature clean style, the Imperial II is in a class of its own.

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision - delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear - redefined.

S-Works Recon EVO with Patented PowerHug Closure

Built for XC and gravel racers chasing every watt, the S-Works Recon EVO delivers uncompromising power with all-day comfort. It fuses the race-tuned precision of Ares 2 with the proven off-road DNA of S-Works Recon, featuring our patented PowerHug closure with dual BOA dials for a locked-in fit built for full-gas efforts. Anchored by the Body Geometry Natural Last for maximum efficiency, this is pure performance—refined, tested, and proven at the highest level.

At a Glance
- Use: XC & Gravel racing
- Body Geometry Last: Body Geometry Natural Last reduces forefoot pressure by 44%
- Outsole Material: Unidirectional carbon
- Fit System: Patented PowerHug with BOA Fit System featuring Dual-Dial Li2
- Weight: 280g for a half-pair, size 44
- Compatible Footbeds Body Geometry SL Footbeds Gen 2, Retul Custom

The ultra-lightweight Gritter excels on endless gravel roads, technical XCO courses, and everything in between. Optimized for low weight without sacrificing comfort, a long-fiber carbon composite plate drives optimized pedaling dynamics. The Syncwire upper is a laminate of breathable ripstop fabric and durable film that conforms to the rider's foot and keeps you cool but protected from the elements. Customize your fit with the Dual Zone BOA Fit System with LI2 machined aluminum dials and our legendary Supernatural insoles, which include three height options of arch supports. And, when you have to hike-a-bike, be confident with our durable Sensor rubber, co-molded to that carbon composite core for a lightweight and permanent bond. Drop bars or flat bars, all-day explorations or 60 minute sufferfests, Gritter is the choice for low-weight, long-lasting, high performance shoes.

Supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high-performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the S-PHYRE RC903 Women’s is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 Women’s is a breathable, high-performance SPD-SL road racing shoe - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Women’s Sizing: designed with a women’s specific last for a natural, comfortable fit. - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The S-PHYRE RC903 Women’s takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

The Empire SLX II brings an even sleeker shape to the Giro icon, with all-new flat knitted Synchwire upper combining the lowest weight paired with the highest levels of comfort and breathability. The unique knitted mesh construction builds the venting into the upper with durability reinforced by a thermally bonded TPU skin. 7 classically-positioned lace eyelets provide unmatched comfort and conformity, while power is delivered by an all-new forged carbon fiber outsole plate which improves the stiffness by 20Nm, all in a featherweight 221gm package for size 43. The Empire SLX II is simply the best iteration of the shoe that redefined laces.

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

The Empire XC builds on the success of the past but keeps the elements that made it loved by gravel riders and XC racers alike. We started with a more flexible Teijin microfiber upper with added suppleness that conforms for a glove-like but never-too-snug fit. Our new co-molded carbon composite and Sensor rubber outsole gives you plenty of grip off bike, power to the pedal and long-term durability. Dependable and easily replaceable laces allow you to fully customize your fit, while inside, our Supernatural™ insole kit allows three choices of personalized arch support. High performance and classic, clean style for when things get dirty.

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

At just 185g per shoe with pro-level performance and unrivaled comfort, the Empire SLX lets you fly in first-class style. To make a minimalist shoe that retains the supportive structure of the legendary Empire while advancing the style, we started with a one-piece ultralight monofilament Synchwire mesh upper designed around a classic laced closure to fit and feel like a second skin. Thermal-welded Teijin TPU adds structural support exactly where its needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness to weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber upper - Empire laces: hold a knot, durable, and light - Easton EC90 SLX2 high-modulus carbon - Titanium hardware - Replaceable heel pads - Ultralight Super Natural fit kit with adjustable arch support - Ultralight footbed - XT2 anti-microbial fiber top sheet - 185 grams (size 42.5 with ultralight footbed)

Made from 100% unidirectional carbon with a stiffness index of 15 the sole has been developed to optimize the power transfer to the pedals thanks to the exclusive high tail structure and the patented Powershape system.

Features
• Greater vents maximize the air flow in and out
• The upper features the underlap construction to enhance the wrapping fit with a uniform closure
• Laser cuts to optimize ventilation and thermoregulation of the feet
• Anatomic Reticular Support (ARS 2.0) technology provides extra support ensuring a correct position of the rider’s foot
• The heel grip with its oriented fibers prevents the foot from slipping out the shoe for a firm fit
• Double SLW3 X-Dial micrometric adjustment closures
• Two double density footbeds are provided to make the fit even more customized. 5 mm (slim fit) and a 3 mm (regular fit)
• The rubber heel pads are replaceable

Perfectly fitting with maximum ventilation, class-leading comfort, and unmatched power transfer, the Infinito R1 Knit road cycling shoe delivers ultimate race performance. Infinito R1 Knit is the first knitted pro cycling shoe ever. Along with its unique knitted material, the all-new Infinito Closure System, superior stiffness, weight-saving materials and the intelligent implementation of new technology make it the pinnacle of performance road shoe design. The knit material is highly breathable, for superior temperature management and enhanced comfort. It is extremely light yet strong and supportive and looks amazing and dynamic. With Dynamic Arch Support technology’s structure and the Increased Volume Control system, which shapes the whole shoe’s upper directly around the foot’s profile, Infinito R1 Knit fits any rider precisely, easily and comfortably. The Infinito Closure System uses two micro-adjustable double Boa IP1-B dials with steel-coated nylon laces in an infinite configuration that adjusts the upper on the forefoot. The textile guides eliminate pressure points, providing optimum adaptable comfortable fit for high-power, high-intensity riding. It harmonizes with the new mesh footbed insole for the best possible ventilation and enhanced comfort. Its laterally stiff, light, Uni Direction Full Carbon Outsole is ventilated for maximum temperature control, and designed for ultimate power transfer from any riding style. Infinito R1 Knit is fi’zi:k’s range-topping shoe, and benefits from the latest technologies, materials and improved design based on feedback and input from some of the world’s leading pro riders. - Materials: Unique new Knitted Material - Outsole: Full UD Carbon Vented - Closure system: Double Infinito IP1-B - Insole: Infinito footbed - Weight: 255g (size 42.5)

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

Step up to premium performance with the engineered elegance of Regime II. Built on the same last as the category-defining Imperial II, this shoe delivers performance features engineered for a competitive advantage - like an injection-molded carbon composite plate that is lightweight-yet-efficient, a BOA closure system with twin L6 dials, and a sleek TPU-bonded upper with laser perforations for optimal ventilation. Whether you're spinning up alpine passes or sprinting for the city limits sign, the Regime II is designed to deliver.

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Every rider deserves pro-level performance when they hit the dirt: the all-new Regime XC delivers. Features include a BOA closure system featuring dual L6 overmolded dials, a supple upper with laser perforation for temperature control, and a carbon composite plate for efficient power transfer mated to a dual-injection rubber outsole that is grippy-yet-durable. Whether you're ripping MTB trails or getting lost on gravel adventures, the Regime XC is engineered to enhance every ride.

KEY FEATURES: - Racing shoe - Ultra lightweight - Stiffness index 10 - HMX carbon sole - Dual BOA® Fit System If you're looking for one package that offers maximum stiffness and minimal weight, the SCOTT MTB RC Evo is your shoe of choice. Primed for pure efficiency, it features an ultra-comfortable TPU airmesh laminate upper. The dual-zone BOA Li2 Fit System allows on-the-fly adjustability at the ankle and at the forefoot. For optimal sole support, the ErgoLogic insole features adjustable arch support and a metatarsal button.

Race-ready. Adventure inspired. The Sector combines a supple, breathable Synchwire upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D molded footbed with Aegis anti-microbial treatment enhances comfort and fit, which is adjustable via dual BOA L6 dials featuring 1mm adjustment and macro release. It's a great choice for riders looking for inspired performance that's capable on the course or off the beaten track. Great for riding on the course or off the beaten track, the Women's Sector mountain bike shoe is ready to power up for adventures. - One-piece Synchwire upper with thermo-bonded exo-structure - Reinforced heel and toe sections - Dual Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - 3D molded footbed with medium arch support - Carbon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware - 323 grams (size 39)