Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$109.99 - $114.99
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

$114.99 - $129.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$34.99 - $44.99
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
Tool interface - 4mm hex key

$47.99
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake

$42.99
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake

$47.99
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake

$49.99
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake
- MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers
- MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders

105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5

$34.95
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

$3.99 - $26.99
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

$7.99 - $20.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets

$8.99 - $18.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets

$46.99
- All Wheels Manufacturing replacement derailleur hangers are produced in Colorado to exacting tolerances.
- CNC machined 6061 aluminum Black anodized finish

$56.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$49.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.

$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Trek Part #282088 Notes: - Post on this hanger is 20mm (.825) in length with an M12 x 1.75 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$49.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$69.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- For carbon frames, use (2) M3x8 Flat head screws
- For all non-carbon frames, use (2) M3x10 Flat head screws
Page 1 of 17
Next page