Cables

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Straight brake cable featuring a 1.5mm pre-stretched inner cable with a tight coil housing and steel cable ends. Product Specifications - Length: 50" - Weight: 3.4oz

RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Extend housing runs using these double-ended junction end caps.

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too. - 4mm for use with solid color shift housing - 4.5mm for use with braided shift housing Each kit includes: - Ten shift housing sealed end caps (ferrules) - Six 5mm brake housing open end caps (ferrules) - Four cable caps (crimps)

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

- Front or rear brake compatible - Road specific - 1.5mm polished stainless steel cable

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

A great replacement for OE cables and a perfect way to bring style to a bike, our 2x Sport Shift kits make it easy. They come with weld-cut single-ended Slick Stainless cables for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This 2x kit is designed for use on bikes with both front and rear derailleurs. - Single-ended shift cables are compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cables combined with Slick-Lube liners offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for front and rear derailleurs - OEM-level cables and housing with high-quality small parts

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Fittings for Jagwire hydraulic hose. - Compression bushings (olives) to install Jagwire hydraulic hose with Shimano disc brakes

Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.