Parts

3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)

3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)

A stem may not seem like the most exciting bike part, but it's in our DNA to care about it in great detail. After all, no other part has such a dramatic effect on your riding position and thus your speed, comfort, and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design comes together in a moving sculpture. Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, particularly in combination with our new drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. - Material: Alloy 6061 - Steerer diameter: 28.6mm (1 1/8") - Handlebar diameter: 31.8mm - Key size: 4mm Allen key - Steerer bolt torque: 5Nm - Faceplate bolt torque: 5Nm

3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar. In fact, it was so good, we didn't touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T's streak as the ergo bar of choice for road cyclists. Drop Grip: The gradual change in curvature makes the grips comfortable for hands of all sizes. The tighter top bend ensures the newest Shimano, SRAM, and Campagnolo shift/brake levers align perfectly for a very comfortable hand position on the hoods. Center Grip: When we surveyed our customers about their desires for this new ergonomic bar, amateur and professionals alike pleaded with us not to change this area at all. It's that comfortable. So we left it alone. - Alloy 7050 - External cable grooves - Stem torque: 6Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Compatible - Di2 compatibility: Not compatible

Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort. The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort. The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort. Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control. Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger. - Unidirectional carbon—-ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Smooth post cantilever pads - 70mm pad length

- Molded road brake pads - 50mm pad length

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Forged Alloy seat-clamp.

Lightweight alloy lever. - Strong Cro-mo axle

Threaded post with hardware - 70mm pad

Fun handlebar-mount streamers. - Quick and easy installation

Forged Alloy seat-clamp with QR lever.

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip - 90mm length

Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm

Fits Shimano / SRAM cartridge pad style carrier - All season compound - Length: 55mm - Black

Fits Shimano / SRAM road calipers - All-season compound - Includes mounting bolts and washers - Length: 55mm - Black

Durable alloy construction - Compatible with standard saddle-clamp assemblies - 350mm length

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm

Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip

- 25.4mm bar clamp - 620mm width with 10 backsweep

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

Lightweight and durable forged alloy stem. - Removable faceplate for easy bar installation - 30 degree rise - Fits 25.4mm handlebars

Durable alloy construction - Quick and easy 1-bolt adjustment - 400mm length

Lightweight low-profile one-piece Polypropylene thermoplastic pedals - Inlaid TPE non-slip rubber tread for unsurpassed grip - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 230g per pair - 9/16" axle - Dimensions: 100 x 80mm

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation

Lightweight and durable alloy flat bar. - 5-degree upsweep and 9-degree backsweep for optimal riding comfort - 600mm width

Real natural cork and EVA construction for ultimate comfort. - Length: 220cm

Offers a comfortable riding position for urban and city bikes. - Lightweight and durable alloy construction - 64mm rise with a 38 degree sweep - 525mm width

Gel padding provides a quick and easy comfort solution - Anatomic centre channel relieves pressure - Drawstring for quick installation - 290mm (L) x 220mm (W)

Lightweight and durable die-cast alloy construction - 2-bolt clamp for maximum adjustability - 15mm offset - 400mm length

The same great features and construction as found on our adult saddles but in a scaled down package that's perfectly sized for the stars of the future! - Generous padding and a subtly curved neutral shape makes this saddle a great all-arounder and suitable for all applications - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 210 x W 130mm - Weight: 253g (excl. saddle clamp)

The same great features and construction as found on our adult saddles but in scaled-down, mid-sized package that's perfectly proportioned for youth riders. - Generous padding and a subtly curved and contoured neutral shape makes this saddle a great all-rounder and suitable for all applications - Raised tail and the dropped nose combine to help keep the rider in a position for optimal support and comfort - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 243 x W 130mm - Weight: 287g (excl. saddle clamp)

60g per pair with end caps - 130mm long - 32mm OD

Ergonomic shape relieves nerve pressure for optimum comfort. - Gel rubber construction offers excellent durability - Diamond pattern provides excellent grip - Inner lock-down clamp for ultra quick and secure installation

Gel rubber construction for the optimum balance of comfort and durability. - Waffle grip pattern provides excellent grip and vibration dampening - Flange provides added contact enhancing control - Flange cut-away provides shifter and thumb clearance - OD: 30mm - Length: 135mm

Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish. - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" axle - Dimensions: 101 x 79mm - Silver - 368g per pair

The Classic Bar offers a comfortable riding position for urban and city bikes. - Lightweight and durable alloy construction - 70mm rise with a 50-degree sweep - 580mm width

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.

A regular width, generously padded saddle that offers excellent comfort and support for upright riding positions with neutral riding positions with equal front/rear weight distribution (MTB, Endurance/Sportive Road, Gravel, Fitness & Urban bikes) a great all-arounder! - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Generous pressure relief channel combines effectively with the base cutout to help alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 263 x W 155mm - Weight: 350g (excl. saddle clamp)

A wider width saddle with generous levels of padding that offers excellent comfort and support for upright riding positions with a distinct rearward weight bias (think handlebars slightly higher than the saddle) and those looking to boost comfort levels a great all-arounder! - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 228 x W 182mm - Weight: 396g (excl. saddle clamp)

An extended width saddle with generous levels of padding that offers excellent comfort and support for upright riding positions with a distinct rearward weight bias perfect for cruiser and leisure/comfort style bikes. - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Long, recessed, pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L243 x W212mm - Weight: 470g (excl. saddle clamp)

A shallow, gently curved saddle that favors a more neutral riding position with a 50/50 weight distribution between the saddle and handlebars (handlebars at a similar/slightly lower height than the saddle). - A great all-arounder and suitable for a bit of everything from Endurance Road/Gravel/Adventure, through to MTB and even fast urban duties effective on both dropbar and flatbar setups - Mid-level padding can be ridden with or without a chamois/padded short - Strategically placed base cutout allows for localized flex around the sensitive perineum area, which, when combined with the extended relief channel on the upper, create an effective combo to help to alleviate pressure and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 277 x W 142mm - Weight: 303g

A long, flat profile that favors an aggressive, front-weighted riding position and more flexible riders (think road race/XC)—the racer's choice! - Narrow nose profile and T-shape silhouette for optimal leg clearance in a forward position and a long, flat bench-like overall shape allows for easy on-bike positional changes and adjustments - Slight kick of the tail comes into its own when the road starts to rise, giving you the perfect position to shift your weight back and use the tail to push against - Strategically placed chevron base cutouts allow for localized flex around the sensitive perineum area, helping to alleviate pressure and keep the blood flowing while not sacrificing overall stiffness - Low level padding - best ridden with a chamois/padded short - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 282 x W 138mm - Weight: 304g

Our roundest profile saddle with our thickest, plushest padding that favors a more upright, rearward weighted position (think handlebars slightly higher than the saddle) and those looking to boost comfort levels! - Raised tail and the dropped nose combine to help keep the rider in a position for optimal support and comfort - Like an old, familiar armchair you kind of sink into it and yet always find the same comfy spot! - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 275 x W 143mm - Weight: 331g

Marketed primarily as a women's saddle but may well find male fans also, particularly of the MTB variety, thanks to its neutral curved shape, reduced length and generous width. - A rounded profile saddle with thick, plush padding that favors a more upright, rearward weighted position (think handlebars slightly higher than the saddle) and those looking to boost comfort levels! - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel combines effectively with the base cutout to help alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 255 x W 153mm - Weight: 312g

Lightweight and durable 2D forged-alloy stem. - Removable faceplate for easy bar installation - 4-bolt clamp for optimal handlebar support - High rise for improved riding comfort - 35 degree rise

3D forged 6061-T6 Aluminum. - Excellent value and performance - A great way to try a few different stems - Suitable for Road or XC MTB - Sand-blasted black finish - + / - 7 degree - 1-1/8" steerer, 31.8 mm bar clamp

Classic/retro styled looks with distinctly modern construction and materials - Barrel polished aluminum body with Polypropylene thermoplastic cage and a taper head 7mm Chromoly axle - Inlaid TPE non-slip rubber tread for unsurpassed grip - Loose ball bearing axle assembly - Built-in reflectors included - 335g per pair - 9/16" axle - Dimensions: 100 x 80mm

3D forged 6061-T6 Aluminum. - Excellent value and performance - A great way to try a few different stem lengths to dial in fit - Sand-blasted black finish - 0 degree - 1-1/8" steerer, 31.8mm bar clamp - 135 grams (55mm)

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory foam technology! - Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits wide cruiser/comfort saddles from approx. 200 - 230mm width - Dimension: L275 x 265mm - Weight: 282g

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology! - Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits wider fitness saddles from approx. 170 - 200mm width - Dimension: L 260 x 245mm - Weight: 245g

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology! - Temperature-sensitive memory-foam padding forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits regular/narrower road & MTB saddles from approx. 130 - 160mm width - Dimension: L 275 x 195mm - Weight: 215g

Lightweight, low-profile full aluminum flat pedal - Barrel polished aluminum body with an ED black (Electrodeposition) or anodized silver aluminum cage - Built-in cage flip tab and mounting points for toe clips - Tough and durable ISO Mountain approved - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" CNC machined Cro-Mo axle - Dimensions: 97 x 63mm

Plush, high grip, perforated polymer tape - 210 x 3cm - Waffle texture with super gel - Adhesive backed - Black screw-in end plugs included

For maximum cruising comfort! - Chrome plated finish - 680mm width

Classic butterfly/trekking/touring handlebars that are perfect for the cyclo-tourist looking to add comfort, efficiency, and stability to their long-distance/multi-day flatbar setups. - Unique bend offers multiple hand positions to help add space, improve comfort, and avoid numbness, strain, pain, and discomfort that can sometimes be associated with riding in the same position for long durations - Highly adjustable with four official hand positions with many more in-between possibilities to help find a position that works for you - Also provides more cockpit space for accessories (bells, computers, mirrors, etc) and handlebar bags - AL-6061 Plain Gauge construction creates a durable and lightweight handlebar that won't break the bank - Grip Area: 148mm - Weight: 500g

3D Forged 6061-T6 alloy. - Strong, stiff and light - Rugged design can handle the demands of today's All-Mountain rider - Low stack height - 31.8 Bar clamp, 0 rise - 150g (45mm length)